Reversing Drum Mechanically Fed Mixers

Heavy duty, reversing drum, mechanically fed concrete mixer manufactured to the highest specification
High capacity mixers capable of producing up to 24 batches per hour. 300R-7.2 cubic metres, 400R-9.6 cubic metres per hour, 500R 12 cubic metres per hour
Standard machine includes water tank with automatic filling and measured volume discharge, or flowmeter.
Hydraulically operated feed hopper Choice of hand/electric start, Lister Petter air cooled diesel engine or 3-phase electric motor
Towable chassis with four pneumatic tyred wheels.
Jacking system allows wheel removal for storage during long term use
WINGET mixers for sale in the EC are CE marked
WINGET is an ISO 9001 accredited company
Efficient after sales spares service through WINGET'S Worldwide Distributor Network.
Mixers shown below include optional batchweigher.

Standard Equipment

Chassis: Heavy duty steel section towable chassis with swiveling front axle and four pneumatic tyred wheels for excellent site mobility. Four jack legs give maximum stability throughout the mixing cycle.
Drum: Heavy gauge spun and rolled drum with proven paddle design lead to thorough, efficient mixing and long life. Fitted with heavy duty drum rollers and sealed shaft bearings for reliability.
Driveline: A smooth, reversible drum action, controlled by a single lever, is provided by the heavy duty drive gearbox with oil immersed clutches.
Water Tank: Automatic filling and manually controlled, measured volume discharge. Amount of water discharged is pre-set by a pointer over a graduated scale on the reservoir. Also available with flowmeter in lieu of water tank.
Feed Hopper: Hydraulically operated loading hopper with high discharge angle ensures rapid and clean feed of materials into drum.
Engine: Lister Petter hand/electric start air cooled diesel engine or 3-phase electric motor.

Optional Equipment

Batchweigher: The Winget Batchweigher is designed around a mechanical parallel link which ensures that when the feed hopper is lowered into the loading position, it rests precisely against a hydraulic load-cell located on the mixer chassis. This system provides constantly accurate weight control of the materials fed into the hopper regardless of load distribution. A large weigh dial clearly calibrated in 5kg (11Ib) increments gives the operator an accurate and progressive readout. Weighing is further assisted by a reset facility and three adjustable markers which can be preset for each type of aggregate.
Dragline Feeder: The Dragline Aggregate Feeder maximizes output from Winget hopper-fed mixers by enabling one man to keep the mixer continuously charged with materials. A powered feed shovel, under direct operator control through a switch on the shovel handle, is drawn towards the mixer on a wire rope operated by a hydraulic winch. The filled shovel is then discharged easily into the feed hopper.
Feed Apron: A converging steel ramp provides a direct path for the dragline feed shovel up to the feed hopper, greatly simplifying hopper charging. Dividing partitions keep coarse and fine aggregates separated. The feed apron also prevents aggregate from building up underneath the feed hopper, ensuring batchweigher accuracy by eliminating discrepancies which may otherwise result from material 'build-up'.
Discharge Cones: Discharge Extension cones give greater discharge clearance; available in steel and rubber. They enable accurate discharge into placing vehicle without spillage.

WINGET 300R DIESEL

CAPACITIES:
Mixed batch output	300 litres
Unmixed Capacity	400 litres
Gross Drum Volume	1600 ltrs
Drum Speed	14 rpm
Max Production Rate	7.2 m3/hr
Dragline Shovel Capacity	140 litres

ENGINE:
Lister Petter TR2	Hand start (electric start optional)17.6hp

DIMENSIONS:
Length o/a hopper down	3.33m
Width o/a	1.82m
Hopper Width	1.50m
Height to top water tank	3.14m
Height to top dragline feeder jib	4.88m
Discharge Height	1.37m
Height hopper raised	3.77m
Ground Clearance - hopper	0.10m
Hopper Loading Height	0.52m
Machine Weight	2325kg

MAKE AN ENQUIRY

WINGET 300R ELECTRIC

CAPACITIES:
Mixed batch output	300 litres
Unmixed Capacity	400 litres
Gross Drum Volume	1600 ltrs
Drum Speed	14 rpm
Max Production Rate	7.2 m3/hr
Dragline Shovel Capacity	140 litres

POWER UNIT:
Electric Motor	415 volt, 3 phase, 50hz, 10hp

DIMENSIONS:
Length o/a hopper down	3.33m
Width o/a	1.82m
Hopper Width	1.50m
Height to top water tank	3.14m
Height to top dragline feeder jib	4.88m
Discharge Height	1.37m
Height hopper raised	3.77m
Ground Clearance - hopper	0.10m
Hopper Loading Height	0.52m
Machine Weight	2325kg

MAKE AN ENQUIRY

WINGET 400R DIESEL

CAPACITIES:
Mixed batch output	400 litres
Unmixed Capacity	600 litres
Gross Drum Volume	2100 ltrs
Drum Speed	14 rpm
Max Production Rate	9.6 m3/hr
Dragline Shovel Capacity	140 litres

ENGINE:
Lister Petter TR2	Hand start (electric start optional)17.6hp

DIMENSIONS:
Length o/a hopper down	3.71m
Width o/a	1.82m
Hopper Width	1.50m
Height to top water tank	3.14m
Height to top dragline feeder jib	4.88m
Discharge Height	1.37m
Height hopper raised	3.77m
Ground Clearance - hopper	0.10m
Hopper Loading Height	0.52m
Machine Weight	2420kg

MAKE AN ENQUIRY

WINGET 400R ELECTRIC

CAPACITIES:
Mixed batch output	400 litres
Unmixed Capacity	600 litres
Gross Drum Volume	2100 ltrs
Drum Speed	14 rpm
Max Production Rate	9.6 m3/hr
Dragline Shovel Capacity	140 litres

POWER UNIT:
Electric Motor	415 volt, 3 phase, 50hz, 15hp

DIMENSIONS:
Length o/a hopper down	3.71m
Width o/a	1.82m
Hopper Width	1.50m
Height to top water tank	3.14m
Height to top dragline feeder jib	4.88m
Discharge Height	1.37m
Height hopper raised	3.77m
Ground Clearance - hopper	0.10m
Hopper Loading Height	0.52m
Machine Weight	2420kg

MAKE AN ENQUIRY

WINGET 500R DIESEL

CAPACITIES:
Mixed batch output	500 litres
Unmixed Capacity	750 litres
Gross Drum Volume	3200 ltrs
Drum Speed	14 rpm
Max Production Rate	12 m3/hr
Dragline Shovel Capacity	140 litres

ENGINE:
Lister Petter TR3	Hand Start (electric start optional) 27hp

DIMENSIONS:
Length o/a hopper down	4.14m
Width o/a	1.82m
Hopper Width	1.50m
Height to top water tank	3.23m
Height to top dragline feeder jib	4.88m
Discharge Height	1.37m
Height hopper raised	3.96m
Ground Clearance - hopper	0.10m
Hopper Loading Height	0.52m
Machine Weight	2610kg

MAKE AN ENQUIRY

WINGET 500R ELECTRIC

CAPACITIES:
Mixed batch output	500 litres
Unmixed Capacity	750 litres
Gross Drum Volume	3200 ltrs
Drum Speed	14 rpm
Max Production Rate	12 m3/hr
Dragline Shovel Capacity	140 litres

POWER UNIT:
Electric Motor	415 volt, 3 phase, 50hz, 20hp

DIMENSIONS:
Length o/a hopper down	4.14m
Width o/a	1.82m
Hopper Width	1.50m
Height to top water tank	3.23m
Height to top dragline feeder jib	4.88m
Discharge Height	1.37m
Height hopper raised	3.96m
Ground Clearance - hopper	0.10m
Hopper Loading Height	0.52m
Machine Weight	2610kg

MAKE AN ENQUIRY

Select a Range

Hand Fed Tilting Drum Mixers: View Product Range

200TM Mechanically Fed Mixers: View Product Range

Reversing Drum Mechanically Fed Mixers: View Product Range